c10443 series psd modules integrates a psd for precision photometry or a 4-segment si photodiode with low-noise amp in a compact case www.hamamatsu.com 1 psd modules contain a high-precision two-dimensional psd (position sensitive detector) or a 4-segment si photodiode and a low-noise ampli er, and are able to perform accurate distance measurement. using a psd module (excluding the c10443-06) with a dedicated signal processing unit c10460 allows obtaining distance information easily. optical axis alignment distance sensors three-dimensional measurement length measurement liquid level sensors distortion measurement features applications easy handling high precision analog voltage output only half size of a business card: 34 (w) 44 (h) 40 (d) mm selection guide type no. detector type photosensitive area (mm) peak sensitivity wavelength (nm) dimensions (mm) frequency bandwidth -3 db (hz) c10443-01 psd 4 4 960 34 44 40 16 k c10443-02 9 9 c10443-03 12 12 920 c10443-04 160 k c10443-06 4-segment photodiode 10 10 960 type no. supply voltage vcc (v) current consumption icc max. dark state (ma) absolute maximum ratings supply voltage vcc max (v) operating temperature * 1 topr (c) storage temperature * 1 tstg (c) min. max. c10443-01 5 12 2 13 0 to +50 -10 to +60 c10443-02 c10443-03 c10443-04 15 c10443-06 *1: no condensation note: exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. always be sure to use the product within the absolute maximum ratings. recommended conditions/absolute maximum ratings
psd modules c10443 series 2 electrical and optical characteristics (typ. ta=25 c, vcc=12 v, unless otherwise noted) type no. spectral response range (nm) peak sensitivity wavelength p (nm) saturation incident light level * 2 (w) photosensitivity * 2 s (mv/w) position detection error * 3 e (m) position resolution * 4 r =10 v (m) typ. max. c10443-01 320 to 1100 960 167 -60 70 150 0.5 c10443-02 150 250 1.0 c10443-03 320 to 1060 920 1.4 c10443-04 4.2 c10443-06 320 to 1100 960 139 -72 - - - *2: = p *3: reference value. values may vary depending on operating environment. position detection error is speci ed within a circular range of 80% from the center of the photosensitive area to the edge. recommended light spot size: 0.2 mm or more * 4: reference value. values may vary depending on operating environment. is the sum of each output voltage and calculated as follows. =v x1 + v x2 + v y1 + v y2 type no. output amplitude voltage vout (v) offset voltage vos dark state (mv) output noise voltage * 5 vn dark state (mvp-p) frequency bandwidth fc -3 db (hz) min. max. min. max. c10443-01 0 -vcc + 1.1 -5 +5 1 16 k c10443-02 c10443-03 c10443-04 0 -vcc + 2.5 -10 +10 3 160 k c10443-06 * 5: 0 v in dark state. a negative voltage output appears when light is input. spectral response wavelength (nm) photosensitivity (mv/w) 0 300 1100 400 600 700 500 800 1000900 -80 -10 -20 -30 -40 -50 -60 -70 (typ. ta=25 c) c10443-01/-02 c10443-03/-04 wavelength (nm) photosensitivity (mv/w) 0 300 1100 400 600 700 500 800 1000900 -80 -10 -20 -30 -40 -50 -60 -70 (typ. ta=25 c) c10443-01/-02/-03/-04 c10443-06 kaccb0151ea kaccb0349ea
psd modules c10443 series 3 scan interval: 1 mm output v x1 output v y1 output v x2 output v y2 dual power supply 5 to 12 v com y1 y2 x1 x2 +vcc -vcc gnd 2d psd reference voltage circuit i/v conversion amplifier output vb output vc output vd output va com 4 ch pd +vcc gnd -vcc dual power supply 5 to 12 v ad bc reference voltage circuit i/v conversion amplifier kpsdc0020ea kaccc0345ea kaccc0753eb c10443-03/-04 c10443-01/-02/-03/-04 c10443-06 block diagram conversion formula x = (v x2 + v y1 ) - (v x1 + v y2 ) v x1 + v x2 + v y1 + v y2 l 2 y = (v x2 + v y2 ) - (v x1 + v y1 ) v x1 + v x2 + v y1 + v y2 l 2 x, y: position (mm) of light spot relative to center of psd photosensitive area l: 4.5 mm (c10443-01) 10 mm (c10443-02) 14 mm (c10443-03/-04) example of position detectability (ta=25 c, =900 nm, light spot size: 0.2 mm) scan interval: 0.4 mm scan interval: 1 mm kpsdc0064ea kpsdc0065ea c10443-01 c10443-02
psd modules c10443 series 4 44 22 3.5 34 40 6.3 37 20 3 (2 ) m2 depth 5 center of photosensitive area photosensitive area c10443-01: 4 4 c10443-02: 9 9 c10443-03/-04: 12 12 c10443-06: 10 10 photosensitive surface m4 depth 5 connector hr-10a-10r-10pb (71) hirose electric, 10-pin, male tolerance unless otherwise noted: 0.2 14 kacca0193eb dimensional outline (unit: mm) secure with optical bench rod, etc. cable (accessory) readout device (voltmeter, etc.) psd module +vcc gnd -vcc v x1 v x2 v y1 v y2 gnd power supply (5 to 12 v) kaccc0349ed kacca0338ea connection example accessories 1 m connector hr10a-10p-10s (hirose electric, 10-pin, female) cable (one end of cable is cut off.)
cat. no. kpsd1027e06 aug. 2015 dn www.hamamatsu.com hamamatsu photonics k.k., solid state division 1126-1 ichino-cho, higashi-ku, hamamatsu city, 435-8558 japan, telephone: (81) 53-434-3311, fax: (81) 53-434-5184 u.s.a.: hamamatsu corporation: 360 foothill road, bridgewater, n.j. 08807, u.s.a., telephone: (1) 908-231-0960, fax: (1) 908-23 1-1218 germany: hamamatsu photonics deutschland gmbh: arzbergerstr. 10, d-82211 herrsching am ammersee, germany, telephone: (49) 8152-375-0, fax: (49) 8152-265-8 france: hamamatsu photonics france s.a.r.l.: 19, rue du saule trapu, parc du moulin de massy, 91882 massy cedex, france, telephone: 33-(1) 69 53 71 00, fax: 33-(1) 69 53 71 10 united kingdom: hamamatsu photonics uk limited: 2 howard court, 10 tewin road, welwyn garden city, hertfordshire al7 1bw, united kingdom, telephone: (44) 1707-294888, fax: (44) 1707-325777 north europe: hamamatsu photonics norden ab: torshamnsgatan 35 16440 kista, sweden, telephone: (46) 8-509-031-00, fax: (46) 8-5 09-031-01 italy: hamamatsu photonics italia s.r.l.: strada della moia, 1 int. 6, 20020 arese (milano), italy, telephone: (39) 02-93581733 , fax: (39) 02-93581741 china: hamamatsu photonics (china) co., ltd.: b1201, jiaming center, no.27 dongsanhuan beilu, chaoyang district, beijing 100020 , china, telephone: (86) 10-6586-6006, fax: (86) 10-6586-2866 product specifications are subject to change without prior notice due to improvements or other reasons. this document has been carefully prepared and the information contained is believed to be accurate. in rare cases, however, there may be inaccuracies such as text errors. before using these products, always contact us for the delivery specification sheet to check the latest specifications. the product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. however, even if within the warranty period we accept absolutely no liability for any loss caused by natural d isasters or improper product use. copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. information described in this material is current as of august, 2015. 5 psd modules c10443 series signal processing unit for psd module c10460 options (sold separately) this unit converts psd module output into position signals. the position signals are output as both analog and digital signals. with the analog signal, simply connect a voltmeter to the connector, and the readout voltage will display the position information [output voltage (v) = position rela- tive to the psd center (mm), excluding c10443-06]. with the digital signal, use a serial connection (rs-232c) to connect with a pc. use the supplied sample software to easily retrieve position infor- mation into a pc. for the speci cations, refer to the c10460 datasheet. dimensions: 150 100 30 mm related information www.hamamatsu.com/sp/ssd/doc_en.html precautions disclaimer
|
